Pen Drive Bootable Unetbootin

How to Make a Bootable Pen Drive using UnetBootin Software

Just follows this few Easy steps and Your Bootable Pen Drive is Ready to Use.

 Things Required:

   1. Pen Drive (more than 2 GB).

   2. Windows 7 ISO Image

   3. UnetBootin Software

   4. Laptop or Computer.

 Steps:-

1.  Download and Install UnetBootin Software.
    Link for Unetbootin software https://unetbootin.github.io/
   
   
2. Right Click on Unetbootin Icon on desktop & select Run as an Administrator.
   
   
   
3. Tick on Disk Image option at the Bottom and Click on three dot to browse to the location of ISO Image file.
   
   
4. Select the Windows 7 ISO image and Click Select.
   
   
5. Select your Pen Drive and Click OK in the next step.
   
   
6. Wait for the Process to Complete. It may take 10-15 minutes approximately.
   
   
7.  After the Process is Complete, restart your Computer to check the Pen Drive is working as a Bootable device.
   
   
   
8. As soon as you see the HP Logo on screen, press F9 Key thrice to go in One Time Boot Menu Option.
   
   
9. Navigate and Select Pen Drive and Press Enter.
   
   
10. In the Next step Windows 7 Setup will start. This means that we had successfully created a USB Bootable Pen Drive of Windows 7 from an ISO image.
    
    
11. If the above process doesn’t work start the process again from Steps 2.